Training Overview

Due to the drastic trend on the development of this industry, we are welcoming those who are interested to know deeper on this knowledge theoretically and practically by joining our training program as below.
Our Training Academy has been established since 1999 and till today we have trained almost 300 candidates with various background. In 2005, we are the 1st company appointed as accredited training partner for Mobius Institute.




Training Courses

Awareness Day for Condition Monitoring
Vibration Analysis Category 1
Vibration Analysis Category 2
Vibration Analysis Category 3
In-situ Balancing Training
Precision Alignment Hand-on Training
Special Industrial Talk with University

ISO 18436 Category I

Basic Vibration Analyst Training & Certification

The Mobius Institute Category I course is the ideal starting place for new vibration analysts, people collecting vibration data, and those who want a better understanding of vibration analysis and condition monitoring. If you are ready to get started in vibration analysis and condition monitoring, this course is for you. You will come away with a solid understanding of why we monitor the condition of rotating machinery (and other critical assets), the importance of improved reliability, and how vibration can be successfully measured and analyzed to provide an early warning of a wide range of fault conditions. You won’t come away as an expert; that’s what our more advanced courses are for.

Mobius makes learning about vibration analysis unique. We use 3D animations, Flash simulations, and numerous software simulators that completely demystify vibration analysis. While vibration training courses have traditionally been very theoretical, difficult to understand (and boring), you will be captivated by the Mobius training methods, and you will enjoy our practical approach. You will take away skills that you can immediately apply to your job, and you will truly understand what you are doing. When senior vibration analysts attend our classes they often say “if only I could have learned this way when I got started”. You have the opportunity to do just that.

ISO 18436 Category II

Intermediate Vibration Analyst Training & Certification

The Category-II course spans four days with an additional half day for review and the exam. It is intended for people who have mastered the basics but who need to be able to take good data (and decide how the data collector should be set up), analyze a range of fault conditions, and understand balancing and alignment. We teach you to test machines correctly, how to diagnose faults accurately, perform additional diagnostic tests for verification, how to set vibration alarm limits, and how to correct certain types of faults. You will learn what your analyzer settings mean so that you can take the best measurements. And you will learn why the vibration signatures change the way they do and how to use time waveform analysis and phase analysis to verify the fault condition.

Mobius makes learning about vibration analysis unique. We use 3D animations, Flash simulations, and numerous software simulators that completely demystify vibration analysis. While vibration training courses have traditionally been very theoretical, difficult to understand, (and boring), you will be captivated by the Mobius training methods, and you will enjoy our practical approach. You will take away skills that you can immediately apply to your job, and you will truly understand what you are doing.

ISO 18436 Category III

Advance Vibration Analyst Training & Certification

The Category-III course covers four days, with an additional day for review and the exam, is intended for people who are confident with spectrum analysis but who wish to push on and learn more about signal processing, time waveform and phase analysis, cross-channel testing, machine dynamics, and fault correction. If you wish to truly advance in vibration analysis and be able to run a successful condition monitoring team, then you are ready for this course. The course exceeds the ISO 18436-2 Category III standard and meets the ASNT Level III Recommended Practice.

You will learn to diagnose all of the common faults conditions with rolling element and sleeve bearing machines, by utilizing time waveforms, phase readings and other techniques to diagnose faults. You will also learn machine dynamics (natural frequencies, resonance, etc.) and how to perform resonance testing and correct resonance problems. The course also covers single and cross-channel measurement capabilities of your analyzer. And after completing the CAT-III course, you will be able to set and run a successful vibration program, and mentor the junior analysts. Mobius vibration analysis training is unique. We use 3D animations, Flash simulations, and numerous software simulators that completely demystify vibration analysis. While vibration training courses have traditionally been very theoretical, difficult to understand, (and boring), you will be captivated by the Mobius training methods, and you will enjoy our practical approach. You will take away skills that you can immediately apply to your job, and you will truly understand what you are doing.

FAQ